How to Clean the Blood off the Carpet? – Step by Step Guide

Removing blood from the carpet? – Sounds a bit creepy and shady. No, Don’t worry. We are not talking about or discussing any crime novel here. We are still sticking to our business and we are discussing carpet cleaning hacks only.

Accidents happen, and sometimes that means dealing with blood stains on your carpet. Blood stains can be difficult to get rid of, whether they are the result of a little cut, a nosebleed, or any other accident. But with the appropriate methods and a little perseverance, you can successfully get rid of those difficult blood stains and restore the carpet’s spotless appearance.

We’ll give you a comprehensive guide on how to get blood out of your carpet, in this blog post.

How to Get Rid of Blood from Carpet?

When we discuss carpet cleaning and especially dealing with nasty stains like blood, the first obvious question that comes to your mind is, whether do it by yourself or call professional carpet cleaners.

The decision on whether to attempt DIY blood stain removal on your carpet or hire carpet cleaners depends on a number of variables, including the severity of the stain, your level of DIY comfort, and the resources at your disposal. To assist you in making a wise choice, take into account the following:

1. DIY Approach:

• Cost-effective: You can save money by eliminating the need to hire professional cleaners by removing blood stains yourself.
• Immediate Action: DIY techniques let you take care of the stain right now without waiting for expert aid.
• Convenience: Taking on the stain yourself might be practical if you have the required supplies and time available.

2. Professional Carpet Cleaners:

• Expertise and experience: Professional carpet cleaners have the knowledge, skills, and equipment to remove tough stains, including blood stains effectively.
• Deep cleaning: To prolong the life of your carpet, experts can perform a thorough deep cleaning that goes beyond surface spot removal.
• Time-saving: By letting experts manage the full cleaning process, from stain removal to drying, you can save time and effort.
• Carpet protection: Experienced cleaners are trained to use the right cleaning agents and techniques that won’t rip or tear the fibers of your carpet.

When weighing the pros and cons of both techniques, it’s usually advised to try DIY stain removal first, especially for little blood spots. However, hiring expert carpet cleaners is a wiser move if the stain is large, persistent, or you’re unsure how to handle it.

Remember, those professional carpet cleaners have access to specific supplies and tools that might provide superior results for difficult or deeply embedded blood stains. Professional assistance can also provide you peace of mind if you’re worried about potential harm to your carpet or want to guarantee a complete cleaning.

Ultimately, your confidence, your resources, and the degree of the stain will determine your choice.

What Cleaning Materials Required to Clean Blood Stains from Carpet?

Harder the stain, more the material you required. If you are giving a shot at DIY technique before calling the expert carpet cleaners, you will be required a whole list of materials to clean the carpet. Here is the list.

• Clean white cloth or paper towels
• Cold water
• Mild detergent
• Ammonia (optional)
• Hydrogen peroxide
• Baking soda (optional)
• Carpet stain remover (optional)
• Scrub brush or sponge
• Vacuum cleaner

Quick Tips Before You Get Started

• First, make sure you stop the bleeding! Make sure everyone is secure before you break out the cleaning tools so we can clean the carpet afterward.
• Always use cold water to wash off the blood. Warm water will allow the bloodstain to harden, making it much more difficult to remove.
• The Quicker you get into action, The easier it will be to clean the bloodstain.
• To remove blood, use a white cloth. Colored rags can spread dye onto your carpet, making the stain worse.
• The bloodstain should never be rubbed. Just Blot and Dab only!

Tips and Tricks to Remove Blood Stains From the Carpet

1. Rinse with Cold Water and Extract the Stain

Use cold water for rinsing and blood extraction. Use a small amount at a time to avoid spreading the stain. Use only cold water because hot water will set the stain and maybe make it permanent. Apply cold water with a sponge, then blot it up with a piece of clean, white fabric. Repeat this procedure until the blood stops staining the fabric. A wet vac can also be used as an alternative, which reduces the likelihood of the stain spreading.

2. Combine Dish Soap and Cold Water

Fill a spray bottle with one spoonful of liquid detergent. Then add two glasses of cold water after that. Give it a few shakes. Spray the area that is impacted. With a sponge or gentle brush, evenly distribute it, and then blot. Several times, repeat the procedure. Rinse the damaged region once more with cold water.

3. Choose Ammonia for Removing Blood Stains

2 teaspoons of household ammonia should be properly incorporated into warm water. Try to avoid inhaling the fragrance. Gently dab the liquid onto the stain and allow it to sit there for up to five minutes. Blot it with a white cloth. This must suffice. You can always retake those actions. Finally, rinse with cold water and apply. Allow to dry.

4. Apply Enzyme Cleaning For Both Fresh and Dried Blood Stains

Start by removing extra blood from fresh stains with a paper towel or wet cloth, and then continue by soaking the wet blood with an enzyme cleaner. Keep it on for a while (perhaps even overnight). To prevent drying, return to the stain and re-spray it with the solution. The better the job the enzymes do, the longer they have to work.

After the allotted time has passed, dab a dry towel in hot or warm water and rub it against the surface. Wring it out if there is extra water. The white fabric should be moist but not drenched. As many times as necessary to thoroughly rinse the fabric, repeat this operation.

5. Try Hydrogen Peroxide for the Blood Stain

You can never go wrong with hydrogen peroxide when it comes to stain removal. Put some of the solutions on the stain or dunk a cotton swab in it. Just enough is required to cover the area and let it foam. Leave it alone for about an hour. When the time is up, return to it and blot the stain. You might try giving it a water rinse. Next, let it dry before doing it again.

Blood that has dried can also be removed with this solution. If it doesn’t function as intended, think about hiring a carpet cleaning specialist.

6. One More To Help is Baking Soda Paste

For any residual stain or odor, create a baking soda paste by mixing it with cold water. Apply the paste to the stained area, gently rubbing it into the carpet fibers. Allow the paste to dry completely, then vacuum the area to remove the dried paste and any remaining residue.

7. Don’t Forget the Carpet Stain Remover

If the stain persists after following the previous steps, you can try using a carpet stain remover specifically designed for blood stains. Follow the product’s instructions carefully, applying the stain remover to the affected area and allowing it to work for the recommended duration. Blot the stain with a clean cloth or sponge and rinse with cold water. Finally, blot dry.

Conclusion

Blood stains are one of the hardest stains but it also can be removed. But, Now that we have discussed everything about removing the blood stains from the carpet, you can keep it all with you and deploy all these tips when you have this situation at your end. Still, some of them are not your cup of tea, so be wise and call Dirt2Neat the Professional Carpet Cleaners in Sydney.