Candles are the inevitable parts of home decorations for creating natural ambiance and bringing warmth to your home. It has been widely used for a long time, of course, in different and growing forms , but it never went out of fashion. However, their charm comes down when it creates some mess with their melting wax and comes down to some of your favorites in the home, like your carpets. Such candle wax can seep deep into your carpet fibres and become so hard to remove if not taken care of immediately and actively. What you need is the right approach at the right time to remove candle wax from carpets.
But don’t worry. There are some old, tried, and tested, but simple ways to eliminate the wax on your carpet that don’t even damage your carpets. Whether you are dealing with small candle wax drops or a larger spill, such techniques always come handy.
In this quick guide, we will examine techniques and steps for getting rid of wax on your carpet. But before that, we need to understand why it is necessary.
Table of Contents
Why You Need to Remove Candle Wax from Carpet?
Keeping candle wax on your carpet doesn’t suit your eye and damages the fibers. The moment this candle wax gets harder, it traps dirt and dust on it and locks it due to its gummy nature. This will make your carpet dirty and may sometimes result in mould.
If not cleaned properly, candle wax becomes more embedded and results in discoloration if the wax belongs to colored candles. Sometimes, if it stays long, it captures some smelly particles. Candle wax joining produces some smelly texture on your carpet, which is hard to remove and sometimes bare at home. This is why you need to get rid of candle wax on carpets.
Quick Steps to Get Candle Wax Out of Carpet
Removing candle wax from your carpet might seem tricky at first, but with the right process, it’s quite manageable. By following a few easy steps, you can get rid of the wax without damaging the carpet fibers or leaving stains behind.
Here’s a quick and effective method to help restore your carpet to its original condition.
Step 1: Let the Wax Harden with Ice Bag
It might be tempting to clean the wax immediately, but hold on! Trying to remove soft, melted wax can cause it to spread further into the carpet fibres. Instead, let the wax harden first. You can speed up the process by placing a few ice cubes in a plastic ice bag and laying them over the wax for a few minutes. Once the wax has fully hardened, it will be much easier to handle.
Step 2: Scrape Off the Excess
Now that the wax is solid, use a blunt tool like a butter knife or a spoon to gently scrape off as much of it as you can. Be careful not to damage the carpet fibres while you’re doing this. Scrape in small, gentle motions to lift the wax pieces without spreading them around.
Step 3: Use Heat to Lift the Wax
For any remaining wax embedded in the carpet, you can use heat to lift it. Here’s how:
- Grab an iron or a hairdryer: Place a plain white paper towel or a brown paper bag over the wax.
- Apply heat: If you’re using an iron, set it to a low temperature (no steam!) and gently press it onto the paper towel or bag for a few seconds. If you’re using a hairdryer, blow warm air over the area until the wax melts.
- Blot the wax: The melted wax will be absorbed by the paper. Keep moving the paper to a clean spot and repeat the process until most of the wax is gone.
Step 4: Clean the Residue
Once the majority of the wax has been removed, you might still notice some leftover residue or discoloration.
To tackle this, follow these steps:
- Dab the area with rubbing alcohol: Apply a small amount of rubbing alcohol to a clean white cloth and dab the stained area. This will help remove any remaining wax and restore the carpet’s original look.
- Use carpet cleaner: If rubbing alcohol isn’t enough, you can use a carpet cleaner or a mixture of warm water and dish soap to clean the area gently. Blot, don’t rub, to avoid damaging the carpet.
Step 5: Fluff the Carpet Fibres
After cleaning, the carpet fibres might look a bit flat. To fluff them back up, gently rub the area with your fingers or use a soft brush. You can also vacuum the spot to restore the carpet’s texture.
Some Extra Tips
- Colored Wax: If you’ve spilled coloured wax (like red or blue), you might need to use a bit more rubbing alcohol or a stain remover to get rid of any dye left behind.
- Test First: Always test any cleaning solution or method on a small, hidden area of your carpet before applying it to a more visible spot, just to make sure it won’t cause damage or discoloration.
Final Thoughts
Cleaning candle wax from your carpet can be done at home with patience and the right tools. However, for tougher stains or larger spills, a professional carpet cleaning service can ensure a deeper clean without risk of damage. If you’re in Sydney and need expert help, contact Dirt2Neat for reliable and thorough carpet cleaning solutions that will leave your carpets spotless.
